MediaShop Backlounge Mode D'emploi page 13

3. HOOKING THE PLASTIC HOOKS
Turn the device upwards.
2.
1. Raise the seat.
2. Push the seat back.
3. Hook the plastic hooks.
4. FITTING THE ANGLE PIN
A. Lift the leg roller with one hand until the holes are aligned with one another.
B. Guide the angle pin through the aligned holes with your free hand.
The inversion angle for the legs can be changed using the angle pin.
Two different positions can be set.
M23090_Backlounge_Manual_20200727_CP.indd 13 M23090_Backlounge_Manual_20200727_CP.indd 13
1.
13
3.
10.08.20 11:52 10.08.20 11:52