Cleaning Andmaintenance - CONTINENTAL EDISON CECV2400BB Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before cleaning, first unplug the electrical outlet and allow the
appliance to cool down.
(1) Wipe off residue and other deposits from the sole with a damp cloth or non-
abrasive (liquid) cleaner.
NOTE : Do not use chemical, steel, wood or abrasive cleaners to scrape the sole.
(2) Clean the top of the iron with a soft, damp cloth. Wipe off any water drops on
the base of the device and the thermal insulation stand with a dry cloth.
(3) Clean the inside of the device by following the procedure in the section
"Self-cleaning button (Orange indicator light)"
NOTES:
If the clean indicator keeps to blinking and the appliance does not perform cleaning after
the clean function is activated, please check and ensure that the temperature dial be
turn to MAX position.
The unit continues to clean when the thermostat knob is turned to the "MAX" setting.
After approx. 3 minutes, the cleaning is finished and the unit is ready for use again.
(4) If the appliance will not be used for an extended period of time, empty the water
tank, turn the thermostat knob to the minimum setting and store the steam
supply hose and the electrical cord at the level of the cord fasteners, then put the
appliance in a place out of the reach of children.
V. CLEANING ANDMAINTENANCE
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières