CONTINENTAL EDISON CECV2400BB Guide D'utilisation page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Grasp the handle of the
water tank
Fill the water tank
3) Correctly place the iron on the thermal insulation bracket on the base
of the appliance (see Fig. 3).
4) Plug the plug into an electrical outlet, then turn the thermostat knob to select
the desired temperature setting, which depends on the fabric of the garment.
See "Ironing tips" on page 18.
5) The temperature indicator lights up and the iron begins to heatup.
6) After a few minutes, the indicator light will go out, indicating that the
soleplate temperature has reached the selected temperature. You can now
start steam ironing.
7) Lightly press the steam trigger, steam is then sprayed continuously
from the soleplate. You can then steam iron the garment.
NOTE : Water may drip out during steam spraying when the temperature is
lower than the second setting. This phenomenon is normal.
If you want to activate the "Steam burst" function to remove a hard
crease, press the steam trigger twice continuously to produce a burst
of steam.
Remove the water tank
horizontally
Replace the watertank
17
Fig. 4

Publicité

Chapitres

Table des Matières
loading

Table des Matières