➢ Steam burst
The steam jet can be activated after pressing the steam trigger twice
continuously. An interval of at least 10 seconds must be maintained between
two continuous cycles.
➢ Cord attachment
When the appliance is not in use, the electrical cord can be tied with a cable tie
and the steam supply hose can be stored at the cord clips (see Fig. 1 and Fig. 2).
Fig. 1
➢ Correct positioning of the iron on the iron rest support
When the iron is placed on the support or its base, it must be placed on it
(see Fig. 3).
correctly.
Poor positioning
Fig. 2
POSITIONING
CORRECT
Fig. 3
15
Poor positioning