Using Your Steam Station - CONTINENTAL EDISON CECV2400BB Guide D'utilisation

B. Using your steam station
The appliance offers two ironing modes. You can use dry ironing or steam ironing. For
more details, see the following.
✓ Dry ironing
1) Place the base of the device on a stable, level surface.
2) Correctly place the iron on the thermal insulation bracket on the base of the
appliance (see Fig. 3).
3) Plug the plug into an electrical outlet, then turn the thermostat knob to select
the desired temperature setting, which depends on the fabric of the garment.
See "IRONING TIPS" and "ADDITIONAL CHART" below when selecting
temperature.
4) The temperature indicator lights up and the iron begins to heatup.
5) When the soleplate temperature reaches the selected temperature,
the temperature indicator will turn off and you can start ironing.
WARNING :
Never touch the hot sole before it has cooled!
CAUTION: RISK OF BURNS!
✓ Steam ironing
1) Place the base of the device on a stable & flatsurface.
2) Grasp the handle of the water tank and pull out the water tank horizontally, fill
the water tank through the filling hole and then put the water tank back in place
(see Fig. 4). Make sure that the water tank is removed horizontally by removing
it. Fill the water tank before each use. Filling can also be carried out during
ironing if necessary.
16