➢ Thermostat button
Turn the thermostat knob to set the ironing temperature according to the item of
clothing to be ironed.
Refer to the wash labels on the garments to check the recommended ironing
temperature.
➢ Temperature indicator
When the iron heats up, the blue indicator light will come on permanently.
As soon as the iron reaches the selected temperature, the indicator light goes out.
➢ Steam trigger
As soon as the appliance reaches the selected temperature and the blue indicator
light goes out, lightly press the trigger, the steam is then sprayed from the
soleplate. When the trigger is released, the appliance can only be used for dry
ironing without steam.
➢ Auto cleaning button (Orange indicator light)
1. The unit must be cleaned when the orange indicator light is permanently on.
Before cleaning, prepare a container with a capacity of more than 300 ml to collect
the wastewater and place the unit on top of the container, making sure that it is
stable.
2. Press and hold down the "Auto cleaning" button for 2 seconds. When the buzzer
sounds, the operator should move away from the unit to avoid being burned by
high temperature steam. temperature during the cleaning process. The unit
switches to cleaning mode and the orange LED flashes. After approx. 3 minutes,
the cleaning is finished and the unit is ready for use again.
CAUTION: RISK OF BURNS!
NOTE :
•
For best cleaning performance, make sure that the thermostat knob is turned to
the "MAX" setting before activating the "MAX" function.
"Self-cleaning". Cleaning may not be performed if the thermostat knob is turned
to other temperature settings than "MAX".
14