Roll Paper Partition - Citizen CT-S4500 Mode D'emploi

3.11 Roll paper partition

When using roll paper narrower than 112 mm in width, move the paper partition to a
suitable position.
1. Turn off the power.
2. Press the cover release buttons on both the right and left sides to open the top cover.
3. Move the paper partition left or right while pressing the paper partition position adjust-
ment button to align it with the paper width position on the paper width scale.
4. Change the print area width while referring to "Manual Setting of Memory Switches."
1. Paper width scale (unit: mm)
2. Paper partition
3. Paper partition position adjustment button
Refer to 5.3 Manual Setting of Memory Switches
1
51
— —
2
2
3