Citizen CT-S4500 Mode D'emploi page 57

6. Use something with a sharp point such as the tip of a pen to slide the head balance
adjustment slider located near the thermal head left or right along the paper size scale
(inches) so that the position of the notch in the slider matches the paper width.
media size scale
1"
CAUTION
 Use this printer with the width adjusted to at least 2 inches.
 Adjust the head pressure horizontal balance carefully so as not to damage the thermal head.
Damaged thermal heads will result in poor printing, paper jams, and malfunction.
 When using paper with a width of 80 mm or more in a very hot and humid environment, we
recommend setting this within the range of 3.5" to 4.65".
7. Close the top cover.
CAUTION
Press the push marks on left and right sides at the top of the top cover and ensure that the top
cover hooks on each side lock securely.
If the top cover is not securely locked, this may cause print errors, paper jams, and malfunction.
Head balance adjustment slider
2" 3" 4" 4.65"
—
Thermal printhead
57
—