3.
Adjust media sensor sensitivity and measure the paper length.
If you press the FEED key, the buzzer sounds once for a short time, the label is fed, and me-
dia sensor sensitivity adjustment and paper length measurement are performed automatically
regardless of the setting of MSW4-1.
The buzzer sounds once for a long time after length measurement and then the printer
restarts automatically.
The length measurement result is saved to the printer and retained in memory even if the
power of the printer is turned off. The length measurement result is printed in a test print.
If the media sensor sensitivity adjustment or paper length measurement fails, the buzzer
sounds and a black mark / label gaps detection error occurs.
To resolve the error, you need to turn off the power of the printer, load the media that is cur-
rently set, and start the media sensor adjustment mode again.
showing a label length
showing a gap between labels
Label Length
Gap Length
<Example of label measuring result>
62
—
:
XXXmm
:
XXmm
—