Leckey Mygo Mode D'emploi page 37

10.1 Transferring the user
into and out of the Stander
Before transferring the child into the stander
carry out the daily product inspection as
outlined in section 12 of this user manual.
We would recommend that users are never
transferred straight from seating to standing
without preparation and stretching. This
is best done in a lying position whilst on a
mat but can be carried out in a wheelchair
or seating system if required. Before
transferring the child into the product lock
all the castors, ensuring that they are facing
outwards to maximise product stability. Make
sure the straps on the chest harness, pelvic
band, knee straps and sandals are released
and out of the way to facilitate transfer.
10.2 Setting the
Stander Angle
Whether used in supine or prone the frame
angle can be easily adjusted by pulling and
twisting the safety lock (a) and turning the
handle (b) until the desired angle has been
achieved (the angle can be read from the
cross bar (c). Turn the handle clockwise to
bring it upright and anti-clockwise to bring it
towards horizontal. The stander can adjust
from vertical (0°) through to 10° off horizontal
(80°). This can be done whilst the child is in
the product.
Ensure that the product and user are
away from surrounding furnishings to
prevent possible collisions when adjusting
the angle.
B
C
A