Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOP PANEL FEATURES
1.
POWER LED – Illuminates when
the mixer is on.
2.
MASTER FADER – Adjusts the
output volume of the Program mix.
3.
STEREO LEVEL INDICATOR –
Monitors the audio level of the
Program mix.
4.
INPUT SELECTOR – Selects the
input source to be routed to the
corresponding channel.
jacks are located on the rear
panel.
5.
CHANNEL GAIN – Adjusts the
channel's audio gain level, pre-
fader and pre-EQ.
6.
CHANNEL BASS – Adjusts the
low (bass) frequencies of the
corresponding channel.
7.
CHANNEL MID – Adjusts the mid-
range
frequencies
corresponding channel.
8.
CHANNEL TREBLE – Adjusts the
high (treble) frequencies of the
corresponding channel.
9.
EQ KILL SWITCHES – Eliminates
the bass, mid, or high frequencies
of the corresponding channel.
10.
CHANNEL FADER – Adjusts the
audio level of the corresponding
channel.
11.
CROSSFADER – Blends audio between Channels 1 and 2. Sliding the crossfader to the left plays
Channel 1. Sliding to the right plays Channel 2.
Note: The crossfader is user-replaceable if it should ever wear out. Simply remove the facepanel, then
remove the screws holding it in position. Replace the fader with a quality authorized replacement from
your local Numark retailer only.
12.
CROSSFADER (CF) SLOPE – Adjusts the slope of the crossfader curve. Flip this switch to the left for
a smooth fade (mixing) or to the right for a sharp cut (scratching).
13.
CROSSFADER (CF) MODE – Press this button to reverse the crossfader assignments of Channels 1
and 2.
14.
TRANSFORM BUTTONS – Plays only the audio from the corresponding channel when button is held
down. Release button to revert back to previous mix.
6
Input
9
of
the
TR ANSF O RM
14
MIC ROPHONE
6
2
5
1
7
8
3
9
9
4
13
12
10
11
5
6
7
8
9
9
9
4
10
14
HEA DPHONES
Publicité
Table des Matières
