Teac CR-H700DAB Mode D'emploi page 6

Playable Discs/Files and iPod/iPhone/iPad Compatibility (2)
Playable Files:
< This unit can play various files recorded in various
external USB storage devices such as USB flash
memory, MP3 player or HDD.
USB storage devices must be formatted FAT 16 or FAT
32, but not NTFS.
< When more than 2000 files are recorded using the
USB memory, the unit might not be able to play them
correctly.
< File names should be alphanumeric characters. This
unit cannot display symbols and full-size or double-
byte characters (such as Japanese, Chinese, etc.)
correctly. Also, be sure to use the proper file extension.
< Audio encoded at 128 kbps should sound close to
regular audio CD quality. Although this player will play
lower bit-rate MP3 files, the sound quality becomes
noticeably worse at lower bit-rates.
The file formats that can be played back by each playback
source are as follows.
Format CD
LPCM

WAV –
FLAC –
ALAC –
MP3
OGG –
WMA
AAC –
MP3
File extension: .mp3
Stream: MPEG-1/2 Layer III
Sampling Frequency: 8 to 48 kHz
Bit Rate: 8 to 320 kbps
LPCM (CD-DA)
Stream: LPCM
Sampling Frequency: 44.1 kHz
WAV
File extension: .wav
Stream: LPCM
Sampling Frequency: 8 to 48 kHz
ALAC
File extension: .m4a
Supported standard: Apple Lossless
Sampling Frequency: 44.1 kHz
6
Media Player
Ethernet
USB
WiFi
cable
– – –
  
  
–
 
  
–
 
  
  
FLAC
File extension: .flac
Stream: FLAC
Sampling Frequency: 8 to 48 kHz
Only 48kHz is supported with USB.
Ogg Vorbis
File extension: .ogg
Stream: Ogg
Sampling Frequency: 8 to 48 kHz
Bit Rate: 16 to 128 kbps
WMA
File extension: .asf/.wma
Stream: WMA2/7/8/9/10, WMA Pro, WMA Lossless
Sampling Frequency: 8 to 48 kHz
Bit Rate: 5 to 320 kbps
Note: WMA Pro and WMA Lossless formats are only
supported when the playback computer is using
Windows Media Player 12 or later. (Playback occurs
after transcoding.)
AAC
File extension: .m4a/.aac/.3gp/.3g2
Stream: MPEG-4 AAC/MPEG-4 HE AAC (AAC Plus v1/2)
Sampling Frequency: 32 to 96 kHz
Bit Rate: 16 to 320 kbps
iPod/iPhone/iPad Compatibility
This unit can be connected to and used with the
following iPod models.
iPod nano ( 2nd, 3rd, 4th, 5th, and 6th generation)
iPod touch (1st, 2nd, 3rd, and 4th generation)
iPhone 4, iPhone 3GS, iPhone 3G
iPad 2, iPad
< This unit cannot output video from a connected iPod/
iPhone/iPad.
< To connect an iPod/iPhone/iPad, use the USB cable
supplied with the iPod/iPhone/iPad.
Compatible iPod Software
In case your iPod will not work with the CR-H700DAB
or with the remote control unit, a software update
may solve the problem.
Visit the Apple website and download the latest iPod
software.