Teac CR-H700DAB Mode D'emploi page 43

Select a network method you want to use.
4
Turn the MULTI JOG knob to select "Wired" or
"Wireless", and then press the ENTER button.
< When you select "Wired":
Use the MULTI JOG knob and the ENTER button to
adjust "DHCP" and "Proxy Setting".
Make sure that the unit is connected to the network
using a LAN cable.
< When you select "Wireless":
1. Turn the MULTI JOG knob to select "Search AP",
and then press the ENTER button.
2. Turn the MULTI JOG knob to select the access
point to connect, and then press the ENTER
button.
3. Turn the MULTI JOG knob to select characters to
input.
See "How to input characters".
4. Use the skip (.//) button to move the
cursor.
5. Press the ENTER button when you finished
inputting characters.
When the unit has been connected to the access
point, press the MENU/FM MODE button to display
"Save", turn the MULTI JOG knob to select "Yes", and
then press the ENTER button.
Make sure that the unit is not connected to the
network using the LAN cable.
Now the unit starts to connect to the Internet.
When connection is established successfully, the
internet radio menu is displayed. See the next page to
select a station.
< If you have a problem connecting to the Internet, see
page 61.
How to input characters
MULTI JOG
1. Turn the MULTI JOG knob to select a set of
characters.
2. When you select the character to input, move
the cursor by pressing /button to input the
next character.
Press the .button to move the cursor to the
previous character.
3. When you finished inputting the characters,
make sure that the cursor is on the last
character, then press the ENTER button.
Repeat steps 1 to 3 to input next characters.
Characters you can input
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
(space)!"#¤%&'()*+,-./:;<=>?@[\]–_||`{|}¯
ENTER
. /
43