Teac CR-H700DAB Mode D'emploi page 39

TRAFFIC ANNOUNCE
When you select "TRAFFIC ANNOUNCE", "TRAFFIC
ANNOUNCE" will blink for 3 seconds and then the unit
searches for a traffic announcement.
< When a traffic programme is found, the TRAFFIC
ANNOUNCE mode is switched to PROGRAM SERVICE
mode.
If the station currently selected is transmitting
a traffic programme signal, the unit searches for a
traffic announcement and selects the next station
transmitting a traffic programme signal.
FREQUENCY MODE
Each time you press the TUNING MODE button, the
frequency tuning mode changes.
You can also switch between STEREO and MONO by
pressing the FM MODE button.
For detailed information about the frequency tuning
mode setting, see pages 35-36.
PROGRAM SERVICE
PROGRAM TYPE
CLOCK TIME
RADIO TEXT
TRAFFIC ANNOUNCE
FREQUENCY MODE
The clock setting of this unit is automatically adjusted
according to the CLOCK TIME (CT) data.
If you tune in an RDS station broadcasting incorrect
CT data, the clock might be wrongly adjusted, and
that may eventually affect the timer operation.
When you do not want the clock of this unit to be
set according to the CT data, turn off the auto clock
adjustment.
< No matter which RDS mode is selected, the unit
receives CT data and adjusts the clock.
To turn off the auto clock adjustment, hold
down the RDS button for more than 8 seconds.
< To turn on the auto clock adjustment again, hold
down the RDS button for more than 8 seconds.
< When the auto clock adjustment is turned off,
CLOCK TIME is not displayed.
39