Malfunctions are often just caused due to minor problems. Before contacting our customer service, please check the table below:
Problem
Radio or TV reception is interrupted during
microwave operation.
The device is not supplied with electricity; the
display is black.
" " will flash in the display.
The device does not start operation. The display
shows a readout other than the current time.
All controls are locked
The turntable causes a scratching or abradant
noise.
The operation is terminated without any obvious
reason.
Technical Data
Model:............................................................................................ MWG 793
Power supply:.......................................................................... 230 V~, 50 Hz
Power consumption:
Microwave: ....................................................................................1150 W
Grill:................................................................................................. 800 W
Rated microwave power output: ....................................... 700 W / 2450 MHz
Cavity volume:......................................................................approx. 20 litres
Protection class: ...........................................................................................
Net weight: .......................................................................... approx. 11.65 kg
The right to make technical and design modifications in the course of
continuous product development remains reserved.
This device has been tested according to all relevant current CE guide-
lines, such as electromagnetic compatibility and low voltage directives,
and has been constructed in accordance with the latest safety regulations.
64
MWG793_IM
Troubleshooting
Possible Cause
The electromagnetic fields of this device
might interfere with the pictures and sound of
special frequencies.
Defect wall socket.
There was a power failure.
The door is not properly closed.
The START button was not pressed after
selecting the function.
The child-proof lock is activated. The display
shows "
".
The display shows the current time. The " "
symbol will flash.
There are dirt or foreign objects in the area of
the turntable shaft.
The device is defect.
Meaning of the "Dustbin" Symbol
This helps avoid the potential effects of incorrect disposal on the environ-
ment and human health.
This will contribute to the recycling and other forms of re-utilisation of
electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be
obtained from your local authority.
Notes / Solution
This is normal and not a malfunction. Position the
devices further away from each other.
Try another wall socket.
Check the main fuse in your household.
Set the clock again.
Check if there are objects or food remains jammed
in the door.
Press the START button to start or continue oper-
ation. Press the STOP / CANCEL button to cancel
the program.
Press and hold the STOP / CANCEL button for
3 seconds to unlock the appliance. You will hear a
signal tone.
An automatic start mode is programmed. You can
see the start time by pressing the TIMER / CLOCK
button. Press the STOP / CANCEL- button to cancel
the program.
Remove possible objects and food remains as
described under "Cleaning".
Please contact our customer service.
Disposal
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
24.10.2018