Canceling A Cycle; Changing A Cycle Or Setting; Adding Items During A Cycle; Option Selections - Whirlpool Estate TUD4700 Guide D'utilisation Et D'entretien

Lave-vaisselle encastré
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Use this cycle for loads
with heavy food soil.
Pre-
Rinse
Rinse
Main
Wash
Wash
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.)
Pre-
Rinse
Rinse
Main
Wash
Wash
Use this cycle for rinsing
dishes, glasses, and
silverware that will not be
washed right away.
Pre-
Rinse
Rinse
Main
Wash
Wash

Canceling a Cycle

You can cancel a cycle at any time.
1. Turn the cycle control knob slowly clockwise until you hear
water draining. Let the dishwasher drain completely.
2. Open the door.
3. Turn the cycle control knob to Off.

Changing a Cycle or Setting

You can change a cycle anytime during a cycle.
1. Lift the door latch to stop the cycle.
2. Turn the cycle control knob clockwise.
3. Check the detergent dispensers. They must be filled properly
for the new cycle.
NOTE: Turning the cycle control knob can cause the covered
detergent dispenser section to open and release the
detergent. Check the covered section if the cycle uses
detergent in both sections.
4. Close the door firmly until it latches. The dishwasher starts a
new cycle.
Use both
detergent
dispenser
sections.
Rinse
Final
Dry
Time
Rinse
(min)
90
Use both
detergent
dispenser
sections.
Rinse
Final
Dry
Time
Rinse
(min)
85
Do not use
detergent
with this
cycle.
Rinse
Final
Dry
Time
Rinse
(min)
20

Adding Items During a Cycle

You can add an item anytime before the main wash starts, or the
cycle control knob reaches Normal Wash.
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door and add the item.
Water
3. Close the door, but do not latch it. Wait 30 seconds for the air
Usage
in the dishwasher to warm up. This reduces the amount of
(gal/L)
moisture escaping from the vent when restarting a cycle.
7.2/27.2
4. Close the door firmly until it latches. The dishwasher resumes
the cycle.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
No Heat Dry
Select this energy-saving option to dry without heat. No Heat
Water
drying is useful when loads contain plastic dinnerware that may
Usage
be sensitive to high temperatures.
(gal/L)
5.7/21.8
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Rinse Only automatically uses this option. No Heat Dry is
an option with all other cycles.
Water
Usage
(gal/L)
Hi-Temp Wash (on some models)
2.9/10.9
Select this option to add extra heat to the water in the Heavy
Plus, Heavy Wash, or Normal Wash cycles. This helps remove
food soil.
Delay Hours (on some models)
Select this option to run your dishwasher at a later time or during
off-peak hours.
To delay the start
1. Close the door.
2. Select a wash cycle and option.
Press the desired cycle. Turn the cycle control knob
clockwise to the number of hours you want the dishwasher to
delay the start.
The dishwasher starts the cycle in the selected number of
hours. You can add items while the time is counting down.
3. Close and latch the door. The cycle control knob will not
advance if the door is unlatched.

Option Selections

11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Estate tud5700Estate tud4700

Table des Matières