Canceling A Cycle - Whirlpool 900 Serie Guide D'utilisation Et D'entretien

SETTI NG T H E C O N T R O L S
CYCLE
LIGHT
LIGHT
•
Select Hi-Temp Wash to heat water
in the main wash.
•
The water heats to 140°F (60°C) in
the final rinse.
RINSE-WASH LATER
RINSE - WASH LATER
USE AIR DRY
RINSE
DRY
•
Do not use detergent.
On 900 Model Series:
•
The water heats to 140°F (60°C) in
the final rinse.
•
Select the Air Dry option when
using this cycle.
On 915 Model Series:
•
Air Dry is automatically selected.
†
* Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control Knob does
not move while water is being heated.
††
Cycle time may be longer on 900 Model Series depending on the temperature of water entering the dishwasher.

Canceling a cycle

You can cancel a cycle at any time.
1. Turn the Cycle Control Knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2. Open the door.
3. Turn the Cycle Control Knob to Off.
16
Single wash for
pre-rinsed or lightly
soiled loads.
For rinsing a
few items to be
washed 1 or
more days later.
A "3 3 3 3 3 " shows what each cycle includes
MAIN
WASH RINSE WASH
3
FINAL
RINSE RINSE DRY
3 3 3
3 3
CYCLE
TIME
(Minutes)
60 †
16 ††