Adding An Audio File To The Play List; Deleting An Audio File; Settings Of The Reproduction; Selecting The Reproduction Mode - IMG STAGELINE DPR-3000 Mode D'emploi

3) If the desired file is in a subdirectory, select and open it [ , ], [OK].
GB
In case of several directory levels, repeat this step, if required. The se-
lection of the list entry " .. " in a subdirectory always leads to the next
higher directory level.
4) Select the file [ , ] and confirm it [OK].
5) In the selection window inserted now select the item PLAY [ , ] and
confirm it [OK].
The menu disappears and the reproduction of the audio file starts.

7.1.2 Adding an audio file to the play list

As an alternative to the reproduction of an individual title or all titles of a
data carrier or directory, an individual play list of desired titles can be cre-
ated. To add an audio file to the play list:
1) – 4)
5) In the selection window inserted select the item ADD TO PLAYLIST
[ , ] and confirm it [OK].
The titles in the list may also originate from different memory locations.
The reproduction from the list is made via the menu item PLAYLIST (play
list chapter 7.4.1).

7.1.3 Deleting an audio file

To delete an audio file from a data carrier:
1) – 4)
5) In the selection window inserted select the item DELETE [ , ] and
confirm it [OK].
6) For the confirmation prompt inserted select "Yes" to delete or "No" to
keep the file [ , ] and confirm it [OK].

7.2 Settings of the reproduction

When replaying, the settings cannot be changed. When trying to call one
of the following menu items during current or interrupted reproduction, a
corresponding note is shown. Terminate the reproduction prior to calling
the menu with the button

7.2.1 Selecting the reproduction mode

1) Call the menu [MENU] and the menu item "Play Setting" [ , ], [OK].
2) In the submenu call the item "Play Mode" [ , ], [OK].
3) Select the desired reproduction mode [ , ] and confirm it [OK]:
Off
Single
Repeat 1 = always repeat 1 title
Repeat Dir = always repeat all titles in the directory or in the play list
Repeat All = always repeat all titles on the current data carrier or in

7.2.2 Selecting the sound adjustment

1) Call the menu [MENU] and the menu item "Play Setting" [ , ], [OK].
2) Call the item "EQ Mode" in the submenu [ , ], [OK].
3) Select the desired sound adjustment [ , ] and confirm it [OK]. For the
adjustment "Normal" the sound remains unchanged.
30
chapter 7.1.1
chapter 7.1.1
= no repeat function
= play 1 title 1 ×
the play list
(10).