Publicité
Les langues disponibles
Les langues disponibles
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
The KICKER KM Tower Enclosures are the perfect way to bring your music out into the marine or power sports
environment. Whether upgrading an existing system or starting fresh, the KM Tower Enclosures are compatible
with any of the KICKER KM or KICKER 6.5 inch (165mm) speakers (KM6000 will require new mounting holes to
be drilled). The injection-molded ABS enclosures are UV treated, splash resistant, and weather resilient. Mount
the KM Tower Enclosures in your boat or get creative with a pair of them in the garage, on your 4x4 or Side-by-
Side's roll bars, or in any other bar-mounted application.
INSTALLATION
Mounting: Your KM Tower enclosures include plastic adaptor inserts for use with the four most popular tower
tubing diameters: 2-1/4", 2-3/8", 2-1/2" and 2-5/8" (without inserts). If your tubing diameter is different, you may
need to use the KMTAP Accessory pack, which includes adaptors for 1-5/8", 1-3/4", 1-7/8" and 2". For other
tubing diameters, additional shims may be needed.
Study your mounting bar for the best possible mounting locations. Spreading the KM Tower Enclosures apart will
provide better stereo performance, and is usually preferable. When determining the best locations for mounting,
be careful to look for obstacles or obstructions that could complicate mounting the KM Tower Enclosures.
Please keep in mind the routing of your speaker wires as this can affect where you fi nally mount your KM Tower
Enclosures.
Aiming: The mounting hardware design provides fl exibility in angular mounting of your KM Tower Enclosures.
This is accomplished by using the included female-threaded internal mounting plates. It is recommended that
you loosely assemble your KM Tower Enclosures and attach them to your mounting bar/tower to determine
proper angular alignment.
steel mounting plate
2
2012 KM Towers Rev F.indd 2
2012 KM Towers Rev F.indd 2
KICKER MARINE Tower Enclosures
Owner's Manual
MODEL:
KMTES / KMTED
11/4/2011 10:23:52 AM
11/4/2011 10:23:52 AM
Publicité
