Cleaning And Maintenance; Safety Advice; Safety Instructions For Maintenance - Bartscher vinoBar 700.300 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

Before beginning with repair or cleaning works make sure the device has been disconnected
o
from power socket (pull the power plug!!!) and has cooled down.
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and the plug in
o
water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not use any
kind of pressure water jet for cleaning the device!
6.2 Cleaning
The unit should be washed regularly.
o
Regularly remove and empty the condensation container. Wash it in warm water with a delicate
o
cleaner. After washing the container, dry and insert it again in the unit.
ATTENTION
The condensation container is not intended for cleaning in a dishwasher!
Clean the inside and outside of the unit with a moist, soft cloth and delicate cleaner. Afterwards
o
wipe the container with a clean cloth.
Never to use aggressive cleaning materials, e.g. abrasive powders for scouring, cleaners with
o
alcohol or thinners which could damage the surface of the unit.
After washing the unit, a soft, dry cloth should be used for drying and polishing the surface.
o

6.3 Safety instructions for maintenance

Check the mains connection cable for damage from time to time. Never operate the device
o
when the cable is damaged. A damaged cable must immediately be replaced by customer
service or a qualified electrician to avoid dangers.
In case of damage or malfunction, please contact your stockist or our customer service centre.
o
Pay attention to the troubleshooting tips in pt. 7.
Only a qualified technician and using original spare parts and accessories should carry out
o
repairs and maintenance of the device. Do not attempt to repair the device yourself.
!
- 27 -