Bartscher vinoBar 700.300 Mode D'emploi page 24

•
The fastenings of the unit's pouring taps are
adapted to Bag-in-Box containers of various
producers.
•
Please make sure that the pouring taps of
Bag-in-Box containers are fastened in the
appropriate groves (like in the drawing).
•
During insertion of Bag-in-Box containers, the
instructions the producer on the packaging
should be followed.
•
In order to reduce cooling loss, the front casing should be inserted after installing the containers.
TIP!
Please make sure that the side pins are correctly inserted in the guide rail when inserting the
upper casing. Then the casing should be slid down towards the pouring taps. Next make sure
that the pouring taps are correctly installed in the openings. If needed, before the final
closure of the casing, adjust the placement of the pouring taps. This assures a safe closure.
Pouring drinks
•
Chilled drinks can be poured from Bag-
in-Box containers if needed.
•
Thanks to the height at which the
pouring taps are located, glasses and
decanters can be easily filled.
TIP!
In order to easier differentiate containers for drinks placed in the Bartscher company
"vinoBar" refrigerator with a distributor for Bag-In-Box type drinks, we enclose a single self-
adhesive magnetic tape as a free sample. The tape can be cut according to needs and a
photo or product description can be glued on it. The magnet adheres to the magnetic front
or back side of the unit. Thanks to its use there is not problem in differentiating drinks. The
magnetic tape is available in various thicknesses.
- 26 -