Télécharger Imprimer la page

SEVERIN KS 9884 Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

control panel. Secure the top cover (B) with the two screws and put the two hinge covers
(A) back on.
- Remove the covers for the door handle mounting-holes on the right side of the door. Use
the screws to mount the door handle, ensuring that it is properly and securely attached.
Place the screw covers over the screw heads, and replace the covers on the handle
mounting-holes on the left.
Control panel and interior light
Before the unit is connected to the mains power after installation, it should be left
standing in position for about 24 hours.
The unit is activated by connecting it to the mains. It is only switched off completely when
the plug is removed from the wall socket. The actual temperature inside the cabinet is shown
in the temperature display.
The setting can be changed by pressing the buttons ▲ and ▼. During this adjustment phase,
the display blinks. With the ▲ button, the temperature can be increased by 1°C or 1°F;
pressing the ▼ button decreases the temperature in the same way.
The indicator lamps next to the temperature levels for RED, WHITE or SPARKLING
show the temperature setting suitable for that particular wine: RED for red wine, WHITE
for white wine, and SPARKLING for sparkling wine or champagne.
The temperature display format can be changed by pressing °F/°C. The selected format is
indicated by the active light next to the appropriate temperature symbol.
The interior light is switched on and off by pressing the button
Changing the interior light bulb
- Switch off the interior light.
- Remove the plug from the wall socket.
- Use a suitable screwdriver to remove the screw
from the lamp cover (1).
- Take off the lamp cover (1) by slightly pulling down
its lower end.
- Remove the defective bulb (2) from its housing (3) and fit a new 10W-bulb (max. 15 W)
of the same size and shape.
- Slide the cover (1) back into position, replace the screw and tighten it.
Storing wine
- The temperature in the cabinet largely depends on factors such as the ambient
temperature, the setting and the number of wine bottles stored. If the ambient
temperature is not between 20 and 25°C, the temperature range for wine bottles (7°C
min. - 18°C max.) in the interior of the cabinet can vary accordingly.
- The following temperatures are suitable for various wines:
Red:
Dry/white:
Sparkling/champagne:
Rose:
- The specified temperature range may vary up or down as a result of outside factors such
as the weather, the interior light being switched on, or the position of the bottles stored
in the cabinet (top, bottom or middle)..
- Because of the way the air circulates, different areas of the refrigerator cabinet are
affected differently. The difference in temperature between the top and bottom shelves
15-18°C / 60-65°F
10-15°C / 50-59°F
7- 9°C / 45-49°F
9-10°C / 49-51°F
15
.

Publicité

loading