Contact Temperature Measurement Function; Settings Menu; Maximum, Minimum, Differential And Average Measurement Function (Max/Min/Dif/Avg) - VOLTCRAFT IR 2201-50D USB Notice D'emploi

When the USB interface is activated, the IR and contact temperature measured values are transferred to
a computer. In connection with the LOCK function and the provided software, this feature thus enables on
can be a long-term logging of measured temperatures. More information can be found in the Help menu of
the software.
h) Contact temperature measurement function
• In addition to the infrared measurement function, the device features a contact temperature measurement function.
In addition to the included wire temperature sensor, all conventional type-K temperature sensors with a mini plug
can be connected to the device.
• When you plug a type-K temperature sensor with a mini plug into the type-K temperature sensor socket, TK
appears on the display in MAX, MIN, DIF or AVG mode. Press the measuring button to display the measured
contact temperature at the bottom of the display.
Note that contact temperature measurement is only permitted on voltage-free objects. Note that contact
temperature measurement is only permitted within the sensor's approved temperature range. The approved
temperature range of the included wire sensor is -50 to +250 °C.
i) Settings menu
• The settings menu allows you to select, activate or set various device functions.
• The graphic shows a schematic of the settings menu.
• Press the MODE button to navigate within the menu. Use ▲ and ▼ to make
adjustments.
j) Maximum, minimum, differential and average measurement function (MAX/
MIN/DIF/AVG)
• Turn the measuring device on by pressing the measuring button.
• Press the MODE button until one of the MAX/MIN/DIF/AVG/LOG symbols flashes on the display.
- MAX (the device shows the greatest measured value during the measurement in the upper area of the display.)
- MIN (the device shows the smallest measured value during the measurement in the upper area of the display.)
- DIF (the device shows the difference between the highest and the lowest temperature during the measurement
in the upper area of the display.)
- AVG (the device shows the average value of the last infrared temperature measurement in the upper area of the
display. AVG = Average)
- LOG (memory function)
• Use ▲ or ▼ to select the desired function.
• Press the measuring button to confirm your input or press the MODE button to proceed to the next setting.
27