Sony Artisan GDM-C520K Mode D'emploi page 15

Connecting the Artisan™ Color Reference System----cont.
Mounting the Display Hood—cont.
5
Fold the adhesive tabs inward toward the display as shown above, pressing firmly to ensure proper adhesion of the tabs
to the underside of the display chassis.
6
Check again to make sure that the hood fits snugly against the display, and the hook and loop fasteners are securely
fastened to the display.
Notes on Mounting the Display Hood
Once the adhesive tabs have been attached to the display, do not remove them, as they will not adhere properly to the
display if detached and then reapplied.
To readjust the display hood, detach the hook and loop fasteners on the hood from the adhesive tabs attached to your
display.
INPUT 1 2 PICTURE EFFECT MENU OK
15