Suitable for induction cooking
Hob operation
4.10 Operating the keys
The controls described here expect the pressing of
a (selection) key to be followed by the pressing of a
subsequent key.
The next key will need to be pressed within 10 seconds,
otherwise the selection will be deleted. The Plus/ Minus
keys can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1. Press the ON/OFF key
displays indicate 0. The controls are ready for
operation.
2. Then press a cooking zone selection key (e.g.
front). The selected power setting display will light up
brightly.
3. Use the Plus key
power setting.
The Plus key will activate power level 1 and the Minus
key power level 9.
4. Immediately put cookware suitable for induction
cooking onto the cooking zone. The pan recognition
device will activate the induction coil. The pot or pan
will be heated up.
The symbol will appear until a metal cooking pot is
placed onto the cooking zone.
If no pot is placed on the cooking zone it will switch off
after 10 minutes for reasons of safety. Please refer to
the Section on pan recognition.
Repeat items 2 to 4 in order to cook on other cooking
zones at the same time.
Switching off a cooking zone
5. Press the required cooking zone selection key (e.g.
for front). The selected power setting indicator will light
up brightly.
6. a) Press the Minus key
power setting indicator shows 0 or
b) Press the On/Off key of the hob
hob will be switched off (all the cooking zones are
switched off ).
Switching off the hob
7. Press the ON/OFF key of the hob
completely switched off , irrespective of any settings.
until the power setting
or Minus key
to select a
several times until the
. The entire
. The hob will be
GB
for
57