Fagor TTE-300 Manuel D'utilisation page 12

Masquer les pouces Voir aussi pour TTE-300:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
5. FUNCTIONING
Stand the toaster on an even, heat-resistant
surface.
• Place the slice of bread in the slot.
• Select the toast darkness on the dial.
• Plug the toaster in.
• Press the toast lever down until it is
retained at the bottom of the toaster.
The toasting cycle will then begin.
• When the toasting cycle ends, the bread
will pop up automatically and the toaster
will switch off. If you wish to toast more
bread, wait 1 or 2 minutes before using
the toaster again.
• The toaster lever can be moved up
during toasting to check the browning of
the toast without the cycle being cut off.
• When you finish using the toaster,
unplug it and wait for it to cool down
before putting it away.
button
If you wish to remove the bread
before the toasting cycle finishes,
press the stop button. The bread will
automatically pop up and the toaster
will switch off.
Reheat
To reheat toast that has gone cold,
insert the bread in the slot, press the
toaster lever down and press the
reheat button
Defrost
This function is used additionally for
toasting bread straight from the
freezer. After selecting the toast
darkness, press the toaster lever
down and press the
High rise function
For easy removal of small items, pull
the toaster lever up as far as it will
go when the toasting cycle finishes.
Before cleaning the toaster, unplug it and
wait for it to cool down.
Wipe the outside of the toaster with a damp
cloth. Do not submerge it in water or place
it under the tap.
Do not use solvents or abrasive products to
clean the toaster.
To remove crumbs, pull out the crumb tray.
Clean it and replace it in its slot.
7. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
a dealer providing this service. Disposing
of a household appliance separately avoids
possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to
obtain significant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in
traditional refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
button.
11
6. CLEANING
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not be
disposed of as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tte-310Tte-320

Table des Matières