Télécharger Imprimer la page

Mitsubishi Electric Mr.SLIM PEAD-A12AA7 Manuel D'utilisation page 4

Masquer les pouces Voir aussi pour Mr.SLIM PEAD-A12AA7:

Publicité

Les langues disponibles

Les langues disponibles

The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
⑫ ⑬ ⑭ ⑮ ⑯
Room
Set temp.
Cool
83
Mode
Indoor unit operation mode appears here.
Preset temperature appears here.
Current time appears here.
Fan speed setting appears here.
Functions of the corresponding buttons appear here.
Appears when the ON/OFF operation is centrally controlled.
Appears when the operation mode is centrally controlled.
Appears when the preset temperature is centrally controlled.
Current room temperature appears here.
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
4
Fri
83
F
F
Temp.
Fan
<Basic mode>
Cool
Mode
Appears when the On/Off timer, Night setback, or Auto-off timer func-
tion is enabled.
appears when the timer is disabled by the centralized control
system.
Appears when the Weekly timer is enabled.
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
Appears while the outdoor units are operated in the silent mode.
Appears when the built-in thermistor on the remote controller is acti-
vated to monitor the room temperature (⑪).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
Indicates the vane setting.
(This indication is not available for this model.)
Indicates the louver setting.
(This indication is not available for this model.)
Indicates the ventilation setting.
Appears when the preset temperature range is restricted.
Fri
Set temp.
83
F
Temp.
Fan

Publicité

loading