TFA 35.1152 Mode D'emploi page 14

TFA_No. 35.1152_Anl_10_19 23.10.2019
SKY– Wireless weather station
9. Temperature alarm
• Press and hold the ALERT button in normal mode.
• 50°C (default) or the last adjusted upper outdoor temperature limit appears and
the display.
• Press the °C/°F – or ALARM ON/OFF + button to set the desired upper limit.
• Confirm with the ALERT button.
• -20°C (default) or the last adjusted lower outdoor temperature limit appears and
the display.
• Press the °C/°F – or ALARM ON/OFF + button to set the desired lower limit.
• Confirm with the ALERT button.
• Press the ALERT button in normal mode, to activate or deactivate the corresponding alarm func-
tion. The respective symbol will appear or disappear on the display.
9.1 Alarm event
• In the event of an alarm, the corresponding symbol will be flashing and an alarm tone will sound.
• Stop the alarm tone with any button.
10. Weather forecast
• For a correct weather forecast the actual weather conditions have to be set (see 6.2 Set weather
symbol).
• There are 5 different weather symbols (sunny, slightly cloudy, cloudy, rainy, snowy).
• The upper display shows the actual weather conditions.
• The weather forecast of the lower symbol relates to a range of 12 to 24 hours and indicates only
a general weather trend. For example, if the current weather is cloudy and the rain symbol is
displayed, it does not mean the product is faulty because it is not raining. It simply means that
the air pressure has dropped and the weather is expected to get worse but not necessarily rain.
The accuracy is about 70 %.
26
17:27 Uhr Seite 14
flashes on
flashes on
SKY– Wireless weather station
• The sun symbol also appears on a starry night.
Note:
Please note that the forecast symbol will become more defined in the course of operation. The
forecast symbol is active right from the start, however, the reliability of the forecasts increases
with the amount of data collected.
11. Temperature and humidity
11.1 Comfort level of indoor temperature
• A marking appears on the display to indicate the comfort level.
11.2 Memory for highest and lowest outdoor values
• There are two memory modes for highest and lowest values:
1. Permanent indication of daily maximum and minimum values with auto reset after 24 hours
2. Additional maximum and minimum memory with manual reset showing time and date of
recording
11.2.1 Automatic reset mode
• As soon as the base station and the outdoor transmitter are active the maximum (HI) and mini-
mum (LO) values for temperature and humidity will be stored and reset automatically after
24 hours.
11.2.2 Manual reset mode
• Press the MEMORY button in normal mode. MEM appears on the display.
• You can now see the outdoor maximum values for the temperature and humidity displayed
since the start-up or the last reset.
• Press the MEMORY button again. The minimum outdoor temperature value flashes showing
time and date of recording. Repeat the process for the other values.
• Press and hold the MEMORY button for three seconds while the maximum and minimum values
are displayed to clear the recorded readings.
27