Lighting The Burners; Flame Failure Device; Pans - Pelgrim PF6120 Notice D'utilisation

Lighting the burners

Press the knob of burner in and turn it to the
left. The burner ignites. The gas flame can be
smoothly adjusted from high to low.

Flame failure device

The flame failure device ensures that the gas
supply is closed if the flame goes out during
the cooking process.
Hold the control knob pressed in in the full
position for approximately 3 seconds. The
flame failure device will switch on.
Saucepans
The recommended pan sizes are:
For the wok burner, min. 28-34 cm;
n
For the rapid burner, min.22-26 cm;
n
For the semi-rapid burner, min.16-20 cm;
n
For the simmer burner, min. 12-14 cm.
n
Wrong :
A great deal of heat is
lost along the sides of
the saucepan.
Right:
The heat is evenly
distributed over the
base of the saucepan.
Tip
Keep the lid on the cooking pan while cooking
and save energy.
Clean saucepans absorb heat more efficiently.
Kitchen timer (PF6139 and PF6140)
The kitchen timer goes off after a pre-set time
has elapsed. The kitchen timer does not turn
the oven off.
Press the 'mode' key until the symbol
n
flickers in the display.
Set the cooking time using the –/+ keys.
n
Now wait 5 seconds. The cooking time is
set automatically. The time of day
reappears and
Press the 'mode' key until the symbol
n
flickers in the display, to view the
remaining time.
The alarm goes off after the pre-set time
n
has elapsed. The symbol
flickers. Turn the alarm
off by pressing one of the 3 keys.
stops flickering.
in the display