Threading The Upper Thread - SilverCrest SNM 33 B1 Instructions D'utilisation Et Consignes De Sécurité

Threading the upper thread

1
2
4
1
A
3
5
2 3
Important:
Set the main switch (19) to ("O").
Raise the presser foot bar by lifting the
two-step presser foot lifter (17) and lift
the thread lever (1) by turning the hand
wheel (20) anti-clockwise. Follow the
arrows and numbers on the sewing
machine when threading.
1. Place the spool (m) on the spool pin (14)
and hold it in place with a spool pin cap
(r).
- Small spool pin cap for thin threads
- Large spool pin cap for thick threads
2. Guide the upper thread through the
upper thread guide (15) from right to left,
then move it forward into the right slot
and guide it downwards.
3. Guide it to the left under the guide lug (A)
and then upwards again.
4. Guide the thread from right to left
through the thread lever (1) and then
downwards.
5. Guide the thread first behind the large,
metal thread guide (B) and then through
the eye of the needle. Always thread the
needle from the front.
B
Needle threader
You can use the needle threader (f) as a
threading aid.
1. Insert the needle threader (f) through the
eye of the needle from back to front.
2. Guide the upper thread through the wire
loop of the needle threader.
3. Pull the needle threader (f) together with
the thread back through the eye of the
needle.
Getting ready
GB / IE 79