KB 125
Bedienungsanleitung / Operating instructions / Mode d'emploi
Wearing parts are the parts subject to operation-related (natural) wear during proper use of the device.
The wearing time cannot be uniformly defined, and differs according to the intensity of use. The
wearing parts must be adjusted, maintained and, if necessary, replaced for the specific device in
accordance with the manufacturer's operating manual. Operation-related wear is not a reason for
defect claims.
•
Feed and drive elements such as toothed racks, gearwheels, pinions, spindles, spindle
nuts, spindle bearings, cables, chains, sprockets, belts
•
Seals, cables, hoses, packings, connectors, couplings and switches for pneumatic, hydraulic,
water, electrical and fuel systems
•
Guide elements such as guide strips, guide bushes, guide rails, rollers, bearings, sliding
protection supports
•
Clamping elements for quick-separating systems
•
Flushing head seals
•
Slide and roller bearings that do not run in an oil bath
•
Shaft oil seals and sealing elements
•
Friction and safety clutches, braking devices
•
Carbon brushes, commutators/armatures
•
Easy-release rings
•
Control potentiometers and manual switching elements
•
Securing elements such as plugs, anchors, screws and bolts
•
Fuses and lamps
•
Auxiliary and operating materials
•
Bowden cables
•
Discs
•
Diaphragms
•
Spark plugs, glow plugs
•
Parts of the reversing starter such as the starting rope, starting pawl, starting roller and
starting spring
•
Sealing brushes, rubber seals, splash protection cloths
•
Filters of all kinds
•
Drive rollers, deflection rollers and bandages
•
Cable anti-twist elements
•
Running and drive wheels
•
Water pumps
•
Cut-material transport rollers
•
Drilling, parting and cutting tools
•
Energy storage
Wearing parts of this machine are grey marked in the spare parts list.
- 32-
02951250999
5004593-02