Maintenance And Care; Preventive Maintenance; Adjustment And Replacement Of Guide Plugs; Adjustment Of Guide Plugs - GÖLZ KB 125 Mode D'emploi

KB 125
Bedienungsanleitung / Operating instructions / Mode d'emploi

5.0 Maintenance and care

5.1 Preventive maintenance

Generally speaking you can say that maintenance at regular intervalls (checking, cleaning and
greasing the machine) has a positive effect on the safety and the life time of the machine.
When cleaning machines which are coupled on shield any electrical parts
The rig doesn't need much care. In table 5-1 it is indicated when a maintenance is recommended.
However, only the intervalls of maintenance are indicated. The work which can be done irrespectively
of that will be discussed later in this chapter.
Interval
After each
operation
Once a week
Once a month
Once a year
If the rig isn't used for a longer time, store it in a dust-free environment.

5.2 Adjustment and replacement of guide plugs

5.2.1 Adjustment of guide plugs

Due to constant friction between the guide plugs (1) and the
guide tracks the blocks are worn. In the long run this will result
in less stability.
1.
Loose the screw (3) a little with a socket wrench
2.
Turn in the plug holder (2) until there is no play
anymore
3.
Fix the screw(3) again (Bild 5-1)
Activity
Cleaning of the:
•
connections
•
connection points
•
rubbers
General check for:
•
demage
•
connection- points
Checking for guide plugs
•
adjustment
•
wear
Greasing of:
•
rubbers
•
rotation axis
•
adjusting screws
General overhaul
Notes
Water, teflonspray
Water
Water
Cleaning
Adjusting and, if necessary,
replacing
Vaseline
Grease
Grease
To be effected by expert staff
- 21-
Bild 5-1
02951250999
5004593-02