Personal Protection; Machines; Environment - GÖLZ KB 125 Mode D'emploi

KB 125
Bedienungsanleitung / Operating instructions / Mode d'emploi
Be always attentive
Pay attention to your work, use your mind and only work with the machine when you are concentrated.
See that, at any time, you are able to stop the motor as quickly as possible. Don't use machines you
can't switch on or off.

2.3 Personal protection

Wear suitable work clothes
Don't wear any clothes which are hanging loosely and don't wear any jewellery. These things can get
between parts which are free to move. When working outdoor we recommend to wear rubber gloves
as well as shoes with grip sole. If you have got long hair, wear a hair-net.
Make use of personal protection means
Wear a helmet against falling objects, gloves in order to protect yourself against pointed parts as well
as safety glasses to protect yourself against falling stones or flying sparks. Wear a respirator mask
when doing work with high formation of dust. Ear protection is recommended if there is a noise level of
80 to 85 decibel (A), ear protection is compulsory there is a noise level of more than 85 decibel (B)!

2.4 Machines

Care of tools
Keep your tools sharp-edged and clean ensuring better and safer work. Keep to the maintenance
instructions. Make sure that the handles are dry and free from oil and grease.
Check if the machine is damaged in some way or another
Check if all parts free to move function faultlessly, if they aren't jammed, if they are broken or mounted
correctly and check if all other conditions for a faultless functioning of the machine are given.
Damaged parts have to be replaced or repaired in a workmanlike manner by admitted expert staff.
Use of accessoires and auxiliary means
Only use accessories and auxiliary means which are mentioned in the operating manual or catalogue.
The use of other accessories or auxiliary means can lead to injuries.
Cable/Extension cable
Only use undamaged extension cables which are appropriated for being used outdoor and make sure
that the cross section of the conductor is adequate.
Unroll a cable drum completely in order to prevent it from overheating. Never take the machine by the
cable to carry it and don't use the cable to pull the plug out of the socket. Protect the cable against
heat, oil and sharp edges.
Repair of electrical equipment
Electrical equipment must correspond to the applicable safety regulations.This is why repairs may
exclusively be effected by admitted expert staff qualified in this field as otherwise there would be a
danger for the user.

2.5 Environment

See that your working environment is clean and tidy
An untidy working environment can lead to accidents. Do not accept that unauthorized people
(children) trespass your working environment or that they can run the machines. Make sure that while
you are drilling or sawing the bored or sawn parts are collected or supported (in particular when drilling
or sawing in soils or in the ceilings). Keep the equipment in safe custody when you have finished work
- 16-
02951250999
5004593-02