Ryobi RYi1802B6 Manuel D'utilisation page 6

WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE USING THIS PRODUCT. Failure to follow all
instructions listed below and on the machine may result
in electric shock, fire, and/or serious personal injury.
WARNING:
When using this product, basic precautions should al-
ways be followed, including the following:
SAVE THESE INSTRUCTIONS
This manual contains important instructions for this product
that should be followed during installation and maintenance
of the power station.
 To reduce the risk of injury, close supervision is necessary
when this product is used near children.
 Do not put fingers, hands, or foreign objects into the
product.
 Use of an attachment not recommended or sold by product
manufacturer may result in a risk of fire, electric shock,
or injury to persons.
 To reduce risk of damage to electric plug and cord, pull
by the plug rather than cord when disconnecting charger
from product.
 Do not use a battery pack or appliance that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
 Do not operate the product with a damaged cord or plug,
or a damaged output cable.
 Do not disassemble the product; take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
 To reduce the risk of electric shock, unplug the product
from the outlet before attempting any instructed servicing.
 To reduce risk of battery explosion, follow these
instructions and those published by battery manufacturer
and manufacturer of any equipment you intend to use in
vicinity of the batteries. Review cautionary markings on
the product.
BLUETOOTH LICENSE STATEMENT
®
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
®
by Techtronic Power Tools Technology Limited is under license. Other trademarks and trade names are those of their re-
spective owners.
IMPORTANT SAFETY INSTRUCTIONS
 Do not expose the power station to rain or wet conditions.
Water entering the power station will increase the risk of
electric shock.
 Do not disassemble the product.
 For indoor use only.
 Store product indoors and away from children.
 As with all electrical devices, use caution when plugging
and unplugging this unit into an outlet or plugging/
unplugging other devices into this unit. Do not force this
unit into an outlet. Do not force plugs into this unit.
 If this unit is used in a manner not specified by the
manufacturer, the protection provided by this equipment
may be impaired.
 Operate this product using only the AC power type listed
in the product specifications.
 Do not force a polarized plug (one prong larger than the
other) into this product. Flip plug over and retry.
 Risk of electric shock. When using a grounded appliance
this tool will not provide an electrical path to earth ground.
 Do not power devices with damaged or frayed power
cords.
 Never block air vents. Blocked vents may cause
overheating. Product will automatically shut off when
overheated.
 Keep product cool. Do not place near heat vents or in
direct sunlight.
 Use only with the provided charger or a charger approved
by the manufacturer.
 Do not use the product around flammable fumes and
gasses, such as in the bilge of a boat or near propane
tanks.
 Do not use the power station if it has been dropped or
received a sharp blow. A damaged power source will
increase the risk of fire.
 Use only in a dry location. Do not allow any liquid to get
inside the power station or charger. Do not submerge the
power station or charger in any liquid.
 Do not store the power station near fertilizers, gasoline,
or other chemicals.
 Do not overload the power station. It must be used for
powering devices less than the product rating.
 For use with RYOBI 40 V battery packs, see tool/appliance/
battery pack/charger correlation supplement 988000-842.
2 — English