Hansgrohe AXOR Citterio 27831 0 Série Instructions De Montage / Mode D'emploi / Garantie page 4

1
¼"
2
3
4
1
2
3 mm
English
Installation – Axor Citterio
Mark the positions of the screw holes.
The center of the top hole should be 36" from the
center of the bottom hole.
Drill the holes with a ¼" bit.
Install the anchors.
Seal the wall around the anchors
using waterproof sealant.
Failure to seal the wall may result
in water damage.
Install the mounting pieces.
Place the wallbar over the mounting pieces.
Tighten the screws.