2
27834xx0
27835xx0
27831xx0
English
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• The screws and anchors included with this
set are suitable for use in a tile or other solid
surface wall. They are not suitable for use in an
acrylic or fiberglass shower enclosure. Please
contact the manufacturer of the enclosure
regarding recommended mounting locations,
reinforcement requirements, and mounting
hardware.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no more
than 120°F.In Massachusetts, the maximum
output temperature of the shower valve can be
no higher than 112°F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Tools Required / Outiles Utiles
/ Herramientas Útiles
3 mm
¼"