Important - Baby Jogger CITY TOUR LUX Mode D'emploi

27 Press button on crotch buckle to
EN EN
release.
RECLINE THE BACKREST
28 Lift the release lever at the back of
the seat to recline the backrest.
WARNING: When making
adjustments to the stroller seat, make
sure child' s head, arms, and legs
are clear of moving seat parts and
stroller frame.
ADJUSTING THE FOOTREST
29 Pull the release levers underneath
the foot rest to fold it down.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attached accessories and
all items from basket.
30 From the back of the seat, Lift the
release lever at the back of the seat
and fold the backrest forward.
• The seat may also be folded while
rear-facing.
IMPORTANT: The seat MUST be
folded before folding the stroller
frame.
31 Slide the handlebar fold release
button while squeezing the fold
button on the handle bar and fold the
handlebar forward.
32 Fold the upper stroller frame down to
the lower stroller frame.
33 Lift up the stroller from the hand
carry strap to help fold the front and
rear stroller frames together.
34 Make sure the storage lock lever
clicks into place.
CARRY STRAPS
35 There are two carry straps for the
stroller: Use the shorter hand carry
strap, or the longer shoulder carry
strap on the top of the folded stroller
to easily carry the stroller.
36 The shoulder carry strap can also be
used for carrying the frame without
the seat. To attach the carry strap to
the frame, first unhook the clasp to
open the plastic loop on the end of
the strap.
37 Slide the open end of the plastic
loop through the webbed loop on
the stroller frame. Then reattach the
clasp to close the plastic loop.
38 With the carry strap securely
attached, the stroller frame may now
be carried.
REMOVING THE SEAT FABRIC
39 To remove the canopy fabric: Undo
the elastic loop from the hook on the
sides of the seat.
40 Pull the ends of the canopy out of
the seat frame.
41 From the back of the seat, unzip the
canopy from the seat.
42 Slide the metal bar out of the canopy
fabric.
43 To remove the seat fabric: From
the back of the seat locate the four
plastic harness clips. Turn the clips
and pass through the openings in the
seat back frame and seat fabric.
44 Undo the two elastics loops on the
back of the seat.
45 Undo the snaps along the sides and
top of the seat.
46 From underneath the seat, locate
the plastic square stopper. Turn
the stopper and pass through the
openings in the seat back frame and
seat fabric.
47 Undo the fastening strip and pass
through the openings in the seat
frame and seat fabric. Then remove
the seat fabric from the seat frame.
48 To remove the harness pads: with the
harness removed from the seat, slide
the pad off the harness strap.
49 To remove the buckle cover: with the
harness removed from the seat, slide
the cover off the crotch strap.
IMPORTANT: When refitting the seat
fabric, assure that the harness system is
properly re-assembled.
CARRY BAG
50 Unzip carry bag storage pocket, fold
your stroller, place stroller into carry
bag.
51 To store the carry bag: Fold the carry
bag tightly, place into the storage
pocket, and zip the pocket.
52 The stroller may also be stored in
the carry bag with the Baby Jogger
Folding Pram.
NOTE: The carry bag cannot hold
both the seat and the folding pram
at the same time. The seat must be
removed from carry bag to store the
folding pram in the carry bag.
53 To store the folding pram in the carry
bag, first remove the pram body from
the stroler frame. Follow the folding
pram instructions to fold the pram.
54 Place the stroller frame in the carry
bag first. Then fit the folded pram on
top of the stroller. Make sure to have
the crease of the folding frame facing
toward the carry bag handle. Zip the
carry bag closed.
13
EN