ETNA OM978RVS Mode D'emploi page 59

USE
P
A
U
T
O
Please note! The time at which the baking process starts is the end
time minus the baking time. For example: the end time is set to 5:00
PM and the baking time is 2 hours. In that case the oven will switch on
at 3:00 PM!
The oven will be switched off and an acoustic signal will go off once the
baking time programmed has elapsed.
6. Press any key to switch off the acoustic signal.
The oven remains switched off and the 'AUTO' symbol flashes.
7. Hold the 'time button' in for a few moments till you hear a beep
to end the function. Turn the oven function knob and temperature
knob to the 'off position' to switch the oven off.
You can check the baking process whenever you wish by holding the
'time button' in for a few moments.
If you wish to change the programming, you should cancel the function
by simultaneously pressing the '–' and '+' buttons. Then set the baking
time and an end time again.
Please note! When the power is interrupted, the programming of the
timer is deleted and the figures '00:00' appear in the display. Set the
current time of day and programme the timer again.
EN 11