Power Requirements - Palmer PFFX Manuel D'utilisation

Dual effects loop switcher
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSERTING/REPLACING A BATTERY
The Battery is of the 6LF22 blocktype (9Volts). A quick access
comparement for easy battery replacement is located at the bottom
of the unit. Always remember to unplug your guitar cord from the
Input of the pedal to prolog battery life. Some battery drain may
occur when the unit is plugged in, even if it is bypassed.
1
Pull the holder
2
Open the cover
3
Insert the battery
(observe correct polarity) the battery
4
Close the holder

POWER REQUIREMENTS

• Battery: Standard 9V battery
• Power consumption: approx. 15 mA
• Power supply:
9 V DC (regulated) 50 mA minimum
5.0 x 2.1 mm barrel style connector center negative
ATTENTION: Please use a DC power supply or battery only!
Failure to do so may demage the unit and void the warranty.
3
2
1
4
11 11 11

Publicité

Table des Matières
loading

Table des Matières