Remote Sensor; Commissioning - VOLTCRAFT TM-500RF Mode D'emploi

b) Remote sensor
21
25
24

9. COMMISSIONING

A suitable type K temperature sensor with thermocouple plug is essential for operation.
Make sure the temperature range of the sensor can cover the range given in the
technical data.
The remote sensor features an internal temperature sensor, but this internal sensor is
only used for compensation. The displayed measured values are only reliable, if the type
K temperature sensor is connected.
At the side of the remote sensor are two connection holes with which you need to
connect the connection plugs of the temperature sensor.
When the temperature sensor cable is to be placed, e.g. through a window, ensure that
the cable is not damaged by sharp edges!
As soon as you insert the batteries into the remote sensor and the base station the pairing
will start automatically. For information regarding manual pairing read the chapter "Pairing".
18
19
20
18 Opening for hanging
19 Button
22 20
Battery compartment
21 Button
(synchronization)
22 Connection type K
temperature sensor
23 Temperature display
23
24 Battery charging status
25 Radio signal display
"C/F"
"SYN"
23