After Drain Cleaning - Wohler RM 300 Instructions De Service

Fig. 13: Drain cleaning
6.5

After drain cleaning


Press the handle and the cable will start to
rotate.
NOTE!
As long as you press the handle, it is not possible
to move the cable forward or backward.

Release the handle and push the cable further
into the pipeline. Repeat this process until you
feel resistance. This means you have reached
the blockage.

When the cable has moved into the pipeline
so far that the working bend is relieved, pull
the cable out of the machine and form a new
working bend.
ATTENTION!
If the movement is very stiff, rotate the cable
clockwise and anticlockwise so that it does not
jam during locking (clockwise rotation) and releas-
ing (anticlockwise rotation).
Make sure that the cable does not get wedged,
otherwise it will be damaged.

Pull the cable out of the tube and clean it with
water.

After using the machine, let it freely rotate for
2-3 minutes.

Flush and dry the cable and augers. Lubricate
them with oil and keep them in a dry place to
prevent rusting.
Operation
EN
35