Publicité
Les langues disponibles
Les langues disponibles
2.
Open the necessary cable entries with a step drill bit. M16 cable entries are suitable for the RS-485 or dry
contact cablings.
3.
Prepare the cable entries with suitable accessories.
4.
Remove the included cable gland from the bottom and close the cable entry with a cover plug (not in-
cluded).
5.
Assemble the base and insert.
6.
Assemble also the installation box cover, if electrical cables are installed in a separate session.
1 x M25 / M32
M32 cable gland for cable Ø 17-25mm
pre-assembled
Cable glands are not included.
Please order the necessary accessories separately. See e-catalogue Legrand.
30 / 68
2 x M16
1 x M25 / M32
LERAK131B_20221004
2 x M16
Publicité
