SEVERIN HM-3812 Mode D'emploi page 10

operation. A tall container with a flat
bottom is best.
- Fit the blender attachment into the
blender mounting. While pushing it into
the mounting, turn the blender clockwise
to lock it.
- Push the blender down into the
ingredients in the bowl before switching
the unit on. Start with a low speed
setting.
- Make sure that the unit can rotate freely
inside the bowl and is not blocked during
operation.
- After switching off, always wait until the
motor has come to a complete standstill
before lifting the blender from the
mixture.
- Always remove the plug from the wall
socket after use.
- The blender attachment can be removed
by first turning it anti-clockwise to
unlock.
General cleaning and care
●
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
●
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
●
Do not use abrasives or harsh cleaning
solutions for cleaning.
- The housing may be wiped with a slightly
damp, lint-free cloth.
- The beaters and dough hooks may be
cleaned using hot water and a mild
detergent.
- The blade unit of the blender attachment
can be unscrewed for cleaning. Before
removing it, ensure that the drive pin on
the shaft sits correctly in the
corresponding recess on the blade unit.
Hold the blade unit with a suitable cloth
and turn it clockwise to unlock. The unit
may be cleaned with a suitable brush.
Caution: the blades are extremely sharp.
To replace the unit, hold it in a suitable
cloth and screw it back on in an anti-
clockwise direction.
- All other attachments can be cleaned
using hot water and a mild detergent.
Make sure that water does not enter the
drive shaft of the blender attachment
from above.
Disposal
Do not dispose of old or defective
appliances in domestic garbage,
but only through public collection
points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. This guarantee
does not affect your statutory rights, nor any
legal rights you may have as a consumer
under applicable national legislation
governing the purchase of goods. If the
product fails to operate and needs to be
returned, pack it carefully, enclosing your
name and address and the reason for return.
If within the guarantee period, please also
provide the guarantee card and proof of
purchase.
10