A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when
you want an instant show. You have to set the first unit in Automatic,sound activated mode .
Its DMX input jack will have nothing plugged into it. The other units will have to select SL 1
OR SL 2, Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave
led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU ,then find Addr ,press ENTER,when the 1 is showing on the display.
Pressing ENTER . Use DOWN and UP button change the DMX512 address. Once the
address has been selected, press ENTER button and then Press and Keep MENU button or
storing automatically 8 seconds later. To go back to the functions without any change press
the MENU button again.
DMX Values
1CH mode:
Channel
1
Value
0
None
1-7
Color 1
8-15
Color 2
16-23
Color 3
24-31
Color 4
32-39
Color 5
40-47
Color 6
48-55
Color 7
56-63
Color 8
64-71
Color 9
72-79
Color 10
80-87
Color 11
Function
16