SEFRAM MW3035 Manuel D'utilisation page 29

- Do not use a flexible current sensor if the inner contrast-
ing color of the insulation of the flexible cord is visible.
- De-energize the installation under test or wear suitable
protective clothing during fitting and removal of the
Flexible Current Probe.
- Do not apply around or remove from UNINSULATED
HAZARDOUS LIVE conductors, which may render
electric shock, electric burn, or arc flash.
 Caution
- Disconnect the test leads from the test points before
changing the position of the function rotary switch.
- Never connect a source of voltage with the function
rotary switch in resistance, diode, continuity, and
capacitance position.
- Do not expose Meter to extremes in temperature of
high humidity.
Symbols as marked on the meter and
Instruction manual
 Risk of electric shock

See instruction manual

DC measurement
Equipment protected by double or reinforced

insulation
<
Battery

Earth
2
AC measurement

Conforms to EU directives
Application around and removal from
E
hazardous live conductors is permitted
Do not discard this product or throw away
H
Both direct and alternating current
2