Main Functions; Self-Test; Automatic Start; Counting Modes - Pecunia T 90 M Mode D'emploi

Main functions

______________________________________________________________________

Self-test

Switch on the machine by pressing the power switch on the back.
If no defects are recognised the following messages will appear: main display "0", batch display "100"

Automatic start

The banknote counter will start counting as soon as banknotes are put onto the hopper.

Counting modes

By default the T 90 M starts in the batch mode (batch "100").

Free counting mode

Press "C" to enter the free counting mode.
All banknotes on the hopper will be counted.

Batch mode

Press "BAT"to enter the batch mode (several times for adjusting common presets).
To set batches apart from the presets use the "+"/ "-" keys.
Reaching the set batches the machine will stop counting.

Counterfeit Detection (EURO)

Four types of counterfeit detection are available (UV, MG, IR, MT). Press "EUR" to activate the euro counterfeit
detection. If suspected notes are recognised the machine will stop and an appropriate message will appear
(see page 11, "error codes")
Counterfeit Detection of a second currency (here: Swiss Franc)
Drücken Sie die Taste "CHF" (Bezeichnung kann bei anderen Währungen abweichen) um die Echtheitsprüfung
für die Zweitwährung (hier: Schweizer Franken) zu aktivieren.
Press "CHF" to activate the euro counterfeit detection (key label may differ with other currencies). If suspected
notes are recognised the machine will stop and an appropriate message will appear
(see page 11, "error codes")
Adding several results (ADD)
To add several counting results press "ADD" to activate the addition function.

Maintenance

______________________________________________________________________
As the machine is exposed to wear it is advisable to clean the device professionally. hbw cash solutions
offers services for that. Feel free to contact the technical support of hbw cash solutions.
As the operating mode of the machine is based upon sensor technology,
do not expose it to direct solar radiation.
hbw cash solutions can take no liability for counting and sorting out different or counterfeit notes, as well as for
the value counting.
The banknotes are feeded by a roller friction system. Therefor no nails, paper clips, hairs and other small parts
should reach the interior of the machine.
Before cleaning the machine the power supply has to be disconnected unconditionally!
Clean the device exclusively with a dry brush, the compressed air* cleaner B8 or the special cleaner R 605 of hbw
cash solutions.
(*alternative: Compressor with dry / oil free air. Max. 4 bar)
Please never clean the device with chemical cleaner.
10