Guarantee; Introduction; Prescriptions, Restrictions And Other Uses; Instructions For The Installer - grandimpianti WR 8 Instructions Pour L'installation Et Mode D'emploi

www.groupdynamics-laundry.com
sales@groupdynamics.lv
GB
INSTRUCTIONS FOR INSTALLATION AND USE
FOREWORD
Congratulations on your selection of our
washing machine. If you follow carefully
the present instructions you will certainly be
satisfied with its performance and guarantee.
In the event of claims or remarks, the
reference text remains the original one in the
manufacturer's native language, that is, the
Italian version.

1. GUARANTEE

- The guarantee is valid for twelve (12)
months, from the date of purchase of the
equipment or part.
- The guarantee consists in the replacement
of any part that proves faulty for
manufacturing causes. It is enforced by the
supplier directly.
- In-guarantee labour, freight and packing
costs, as well as the shipping risks must be
born by the purchaser.
- The guarantee is valid only if the faulty
parts are sent back carriage paid, along with
the information on the model, serial number
and defect of the machine the part was
assembled onto.
- The guarantee does not apply to machines
that were damaged by malpractice or
carelessness, misconnection, incorrect
installation, non-compliance with the
instructions for assembly and use, nor does
it apply to machines that were tampered with
by unauthorised personnel. The guarantee
does not apply to machines whose serial
number appears to have been altered, erased
or removed.
- The guarantee does not cover the following
items:
parts which are subject to ordinary wear like
belts, valve membranes and rubber parts at
large; electrical parts like motor, coils,
contactors, heaters, etc.

2. INTRODUCTION

The present manual was drawn up in a
simple and logical manner in order for the
reader to get to know the appliance
thoroughly. Please, read it carefully and
keep it near the machine at all times. The
advice and instructions contained in this
manual cannot cover every possible
contingency. This is why it is important to
keep in mind that common sense and caution
cannot be supplied by the manufacturer along
with the appliance, but must be contributed
by those in charge of its installation,
maintenance and use. Whoever operates the
machine must have read this manual
beforehand.
In case of repairs the manufacturer warmly
recommends the use of original spare parts.
As for ordering these, reference is made to
paragraph 8.
The descriptions and sketches reported in
this manual do not bind the manufacturer,
who reserves the right to update them and/or
include any upgrading modification of parts
and fittings at any time and with no previous
notice if this is deemed necessary for
manufacturing or commercial purposes.
3. PRESCRIPTIONS,
RESTRICTIONS AND OTHER USES
The machine must be operated by trained
personnel only.
Disconnect it in case of malfunction and/or
faulty operation.
During use, cleaning and maintenance it is
absolutely necessary to be sure that tools or
hands are never stuck in the moving parts of
the appliance (motor, belts, etc.).
The manufacturer disclaims all liability for
any personal injury to operators or other
people occurring while using, cleaning or
servicing the machine.
Do not open the dispenser while the appliance
is working. The detergents and warm water
involved may represent a hazard.
The appliance was designed for washing
fabrics according to the instructions that can
be read on the labels attached to the garments
or fabrics. Only wash clothes, household
linen and ordinary everyday-use fabrics.
Do not load the machine with fabrics that
have been in contact with inflammables or
chemicals. If this is unavoidable, hand-wash
them and air-dry them to let those substances
evaporate.
The operation of any electric or electronic
appliance entails compliance with certain
basic rules and in this case particularly: In
particular: do not touch the machine with
damp or wet hands or feet; do not use it while
barefoot, do not expose it to atmospheric
agents like rain, salt, salinity, etc. Do not
allow machine operation by children or
disabled persons without proper supervision.
Do not smoke near the machine or during
operation. Do not override or by-pass safety
devices. Do not clean the machine by spilling
water directly or indirectly over it and
therefore, install far from areas in which
these events are likely to occur.
ANY USE NOT EXPLICITLY
MENTIONED HERE BELOW MUST BE
CONSIDERED AS A HAZARD. THE
MANUFACTURER ASSUMES NO
RESPONSIBILITY FOR DAMAGE
RESULTING FROM
WRONG AND UNREASONABLE USE.
14
INSTRUCTIONS FOR
THE INSTALLER
4. HANDLING, UNPACKING AND
STORING
4.1 SHIPPING AND HANDLING
In the event of having to handle and/or ship
the machine, follow carefully the ensuing
recommendations:
Move the machine on its own pallet or on a
similar platform; use a fork lift, either manual
or electric, provided it is adequate for
handling such appliances and it has the
requisite lifting capacity (cfr. technical data).
Check beforehand that the appliance can
surmount every existing obstacle, like
staircases, doors, etc. Do not drag the machine
by the sides or by any other part.
For shipping purposes, use only the original
packaging, which helps ensure sufficient
stability during transportation.
4.2 STORING
If the appliance must be stored for a long
period before being put into operation, keep
it inside the original package, since this
guarantees best protection. Store it in
premises where ambient conditions comply
with the requirements in paragraph 5. If the
machine must be out of service for a long
period after use, ensure that it is materially
disconnected from the electric power supply
and cover it with its original plastic bag.
4.3 UNPACKING
1) Prior to accepting the machine from the
carrier, check the conditions of the package.
If it is showing visible damage, the machine
may have been damaged too. In this case,
unpack the machine in the presence of the
carrier and sign, under reservation, the
respective delivery note. The manufacturer
assumes no liability for any damage caused
by transportation or improper storage.
2) Unpack the machine with the utmost care
to avoid damage. To remove the platform,
take off the screws on the floor-fastening
holes.
3) Open the door (cfr. section 7.2)
4) Ensure that the following material is there:
- # 2 metal tie wraps,
- # 1 90° rubber elbow,
- # 2 flexible pipes with ¾ ferrule,
- keys to the top cover, (only for models with
IMPROPER,
lock on the top)
- fastening clamps with ferrule and open or
toothed washer,
- # 1* brass strain for the steam inlet (steam-
heated model only)
- # 1* metal flexible tube, (solo mod. vapore)
- keys to the coin drawer and 15 coins (only
for coin-operated versions)