To Mount In The Eia 19-Inch Rack - Sony PC-3000 Mode D'emploi

To Mount in the EIA 19-inch Rack

b
a
Attach the supplied holders by using the mounting holes a (× 4), with the
supplied screws.
Attach also the sliding rails (optional) by the mounting holes b (× 6).
Then, mount the unit in the rack.
For mounting details, refer to the instruction manual of the 19-inch rack.
Note
Be sure to use the supplied screws to attach the holders and sliding rails to
this unit.
Attention-when the product is installed in rack:
1 Prevention against overloading of branch circuit
When this product is installed in a rack and is supplied power from an
outlet on the rack, please make sure that the rack does not overload the
supply circuit.
2 Providing protective earth
When this product is installed in a rack and is supplied power from an
outlet on the rack, please confirm that the outlet is provided with a
suitable protective earth connection.
3 Internal air ambient temperature of the rack
When this product is installed in a rack, please make sure that the
internal air ambient temperature of the rack is within the specified limit
of this product.
4 Prevention against achieving hazardous condition due to uneven
mechanical loading
When this product is installed in a rack, please make sure that the rack
does not achieve hazardous condition due to uneven mechanial loading.
b
a
33
(EN)