Adjustments and Settings in the Service Mode
Adjustments and Settings on the Display Window
On Display of Service Mode
24
(EN)
Note to customers
The service mode is set by the service personnel.
We recommend that customers do not operate the unit in service mode.
The following is for qualified service personnel only.
The direct power, index, key lock and baud rate also may be set in the
service mode. As the service mode is protected, making it inoperable,
enter the service mode before operating.
Note
The switcher to be set differs depending on the menu item. Please refer to
below.
Items set only on switcher 1
- Setting the Direct Power (DIRECT POWER)
- Setting the sync output signal (SYNC OUT SETTING)
Items set on each switcher
- Setting the key lock (KEY LOCK SETTING)
- Setting the baud rate (BAUD RATE SETTING)