EN
Basic controls
Setting the clock
The clock display will flash to indicate that the time shown is not correct. To set the clock, proceed as
follows:
1. Select the Clock Symbol with the Parameter
selection
keys
microwave oven is first plugged in or after a
power failure).
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by proceeding as follows:
1. Select the Clock Symbol with the Parameter selection keys.
2. Press and hold the Confirmation key for 3 seconds. The clock will be hidden but the dots between the
hours and the minutes will flash once per second.
To show the clock again, repeat the above procedure.
Safety blocking
The oven functioning can be blocked (for example, to stop it being used by children). Proceed as
follows:
1. To block the oven, press the Cancel key for 3
seconds. You will hear a sound signal and the
clock display will show the word "SAFE". The
oven is blocked in this state and cannot be
used.
(not
necessary
if
2. Set time with Plus and Minus keys.
your
3. Confirm the selection with the Confirmation
key.
2. To unblock the oven, press the Cancel key
again for 3 seconds. You will hear a sound
signal and the clock display will show the time
again.
9